vip@mingtai-al.com Chinese Spanish Pусский
HOME> MEDIA> Mingtai News

Mingtai Aluminum: 5052 Aluminium Sheet, Plate, Coil Supplier

2015-12-14

Mingtai Aluminum is one of the largest 5052 Aluminium Sheet, Plate, Coil manufacturer in China, and China’s leading 5052 Aluminium Sheet, Plate, Coil supplier and export.

5052 is an aluminium alloy, which is mainly alloyed in the company of chromium and magnesium. Typical applications of 5052 Aluminium Sheet, Plate, Coil comprise architecture, heat exchangers, and general sheet metal work. 5052 Aluminium Sheet, Plate, Coil has an excellent workability, good weldability and high fatigue strength. It has exceptionally good corrosion resistance, particularly in marine environments. 5052 aluminium can be anodized to perk up the corrosion resistance of the material in corrosive environments.

5052 Aluminium Sheet, Plate, Coil is often referred to as "Anodize Quality Aluminum", as it has excellent finishing qualities and anodized coatings are bright and clear. The major alloying element in 5052 is magnesium in sufficient quantities to cause substantial lowering of the melting point without producing brittleness. When magnesium is used as the major alloying element, or in combination with manganese, the result is a moderate to high strength non-heat treatable aluminum alloy. 5052 is far stronger than the 1100 or 3000 series aluminums, yet forms with reasonable bend radii. Weldability is very good and 5052 has good resistance to corrosion, especially in salt-water / marine atmospheres.

5052 Aluminium Sheet, Plate, Coil is widely used for cooking utensils, food processing equipment, storage tanks, truck and trailer components, mail boxes, aircraft components, electronic chassis, boat hulls, deck houses, hatch covers, pressure vessels, ladders, railings, frames, drip pans, tool boxes, truck bumpers, inner and outer body panels and components in truck and auto industries, kitchen equipment, decorative trim, architectural uses, signage applications, and any number of parts and application requiring strength and good formability at reasonable cost.

Applications

• Architecture

• General sheet metal

• Heat exchangers

• Marine environments

The alloy composition of 5052 is:

Magnesium - 2.2%-2.8% by weight

Chromium - 0.15%-0.35% maximum

Copper - 0.1% maximum

Iron - 0.4% maximum

Manganese - 0.1% maximum

Silicon - 0.25% maximum

Zinc - 0.1% maximum

Others each 0.05% maximum

Others total 0.15% maximum

Remainder Aluminium

See Also...

Henan Mingtai Al

Mingtai Aluminum

+86-(0)371-86541576

vip@mingtai-al.com

WhatsApp / Viber
+86 186 3826 8963

Message inquiry

The fastest time to contact you