vip@mingtai-al.com Chinese Spanish Pусский
HOME> MEDIA> Mingtai News

Introduction of Aluminum Foil for Tape

2015-12-23

Aluminum foil for Tape, as the name implies, is aluminum foil tape commonly used in electronic products. Tape foil has sticky good, strong adhesion, anti-aging, good insulation performance due to using high-quality pressure-sensitive adhesive tape.

Tape foil has two alloys: commonly used in industry for the 1235 and 8011, it can be subdivided into a soft temper and hard temper, single-side bright and double-side bright Depending on the performance requirements, the production process is also not the same.

Firstly, composition for alloy 8011 and 1235 is different.Difference on production process mainly lies in annealing temperature. The annealing temperature for 1235 is lower than alloy 8011, but the annealing time is the same. For tensile strength, alloy 8011 is slightly higher than alloy 1235. .

Secondly, tape foil is divided into soft temper and hard temper, namely H18 and O temper. Foil tape for hard temper does not need annealing process ,but sometimes necessarily bake oil. foil with soft temper is required annealing, then its performance turns to be soft. Now, foil of tape for1235 / O is rather commonly in the market.

All in all, the main process program for tape foil is sequentially blank, rolling, cutting, annealing (according to performance requirements), packing.the entire production cycle is about 7-10 days.

Aluminum foil for tape is widely used in refrigerators, air conditioners, automobile, petrochemical, bridges, hotels, electronics and other industries.

See Also...

Henan Mingtai Al

Mingtai Aluminum

+86-18638268963

vip@mingtai-al.com

WhatsApp / Viber
+86 186 3826 8963

Message inquiry

The fastest time to contact you