Get a quotation
5754 h114 Aluminium Chequered Plate
5754 h114 Aluminium Chequered Plate
Model : 5754
Thickness: 0.8-7.0mm
Delivery Terms: FOB, CFR, CIF

OEM/ODM, Design Service Offered

Brief introduction:

5754 h114 aluminium chequered plate refers to the 5754 aluminum checker plate of h114 temper, whose performance is similar to 5754-O aluminum properties, that is, the 5754 aluminum sheet is fully annealed to obtain the lowest strength in the O temper state. However, the 5754-O aluminum sheet was then changed into the aluminum checker plate after surface embossing treatment. At this time, the temper state was specifically referred to as h114, which formed the 5754 h114 aluminium chequered plate we called. So, when we see h114 temper again, it usually corresponds to the aluminum tread checkered plate. It’s not difficult to find that, the tread plate 5754 h114 properties exhibit excellent workability, weldability, and plasticity like 5754-O aluminum. Here, most notably that Mingtai 5754 aluminium alloy obtained I S O 9 0 0 1 / I S O 1 4 0 0 0 / S G S / D N V / C C S / A B S / BV / LR certificates, the quality is extremely guaranteed !

Applications and Features:

1. Excellent Corrosion Resistance. The corrosion resistance of 5754 h114 aluminium chequered plate is unmatched by many tread metal sheets, so it can be applied to extremely humid environments such as ships, carriages, and open air.

2. Amazing Surface Treatment Effect. The surface of 5754 h114 five bar aluminum alloy tread plate treated by roller printing shows a very clear pattern line, wear-resistant and non-slip, the decorative effect is so amazing !

3. Bearing Strength. The strength of 5754 h114 aluminium chequered plate is higher than grade 5251. This high strength makes Grade 5754 very suitable for aluminum chequer plate flooring applications.

The Use of 5754 h114 Aluminium Chequered Plate

For High Performance Requirements

5754 h114 aluminium chequered plate can be well adapted to applications with high performance requirements, such as giant cruise ships, wind tower internal, ship/carriage floor/walls, pedestrian bridges, aerial work winding ladder, media platform,etc., and other requirements that require a certain strength, carrying capacity, and high corrosion resistance in the environment. Diamond, two, three, or 5754 h114 five bar aluminum alloy tread plate not only have a strong decorative effect, but also play a very important role in anti-slip and safety !

Checking Order Quality Test Before Delivery Check Items When Packing Packaging And Transport
Get An Instant Quotation

For all inquiries, please fill in the form below (* are required) to send us a brief message, and we will get back to you as soon as possible.

Name:
* Email:
Tel: