Get a quotation
7A09 Aluminum Sheet
7A09 Aluminum Sheet
Model : 7A09
Thickness: 1-600mm
Delivery Terms: FOB, CFR, CIF

OEM/ODM, Design Service Offered

Brief introduction:

7A09 aluminum sheet is Al-Zn-Mg-Cu alloy, which is an ultra-high strength deformed aluminum alloy that has been used in the aircraft industry in the late 1940s and is still widely used in the aviation industry. Through proper T6 aging treatment, the material can reach its peak strength, and has good resistance to exfoliation and corrosion. The composition ratio of 7A09 is higher than that of 7A04 aluminum sheet. The static fatigue, notch sensitivity, and stress corrosion resistance of the sheet are better than 7A04. 7A09 aluminum sheet is used in the aerospace industry with high strength, good weight reduction, and improved aircraft safety.

Applications and Features:

1. The heat treatment strengthening effect is particularly good, with high strength below 150 ℃, and particularly good low temperature strength.

2. High ratio strength, good fracture toughness and thermal conductivity.

3. The plasticity after solution treatment is good. The plasticity under annealing and just quenching temper is slightly lower than that of 2A12 aluminum sheet with the same temper, and slightly better than 7A04.

4. Poor welding performance. Prone to stress corrosion cracking, unless under T6 temper.

The Use of 7A09 Aluminum Sheet

7A09 aluminum sheet is widely used in the aviation industry and used to manufacture various important parts. 7A09 aluminum is used for aircraft skins, wall panels, bulkheads, front beams, ribs, joints, pillars and landing gear, cylinder hydraulic systems, hydraulic oil tanks with movable rods, outer tubes and other key components. The light weight of aluminum can reduce the weight of the aircraft, but this does not affect the safety of the aircraft, and it can even be improved.

Checking Order Quality Test Before Delivery Check Items When Packing Packaging And Transport
Get An Instant Quotation

For all inquiries, please fill in the form below (* are required) to send us a brief message, and we will get back to you as soon as possible.

Name:
* Email:
Tel: