SOLUTION
HomeAluminum Process Factory
Aluminum for Bus Duct
Aluminum for Bus Duct

Aluminum for bus duct usually uses 1060 aluminum sheet, 1070 aluminum sheet, those pure aluminum plates as raw material, and the common thickness is from 10-400mm. For the tensile strength of 1060 aluminum for bus duct sheet is 110MPa-136MPa, the conducti

Get Tailored Solutions Product Center

With the construction of high-rise buildings and the expansion of factories, Aluminum enclosed busway is a good alternative to the traditional cable, with the advantage of being able to pass the rated current of 6300A, which greatly satisfies the huge demand for electricity. In fact, conductor busduct/ busway/ busbar trunking is a busbar system composed of a metal plate (steel plate or aluminum plate) as a protective housing, as well as conductive bars, insulating materials and related accessories. The aluminum for bus duct metal plate is usually made from 1060 aluminum sheet, and 1070 aluminum sheet, those pure aluminum plates with common thickness ranges from 10 to 400mm. So, the aluminum enclosed busway produced in this way has the characteristics of good conductivity, excellent corrosion resistance, moderate strength, strong overload capacity, good thermal performance, cost-effective overall construction cost, low post-maintenance risk, easy tapping, and high safety, etc.


Advantages of Aluminum for Bus Duct-Mingtai Al.


1. Use 1060 aluminum sheet and1070 aluminum sheet as the aluminum conductor busduct backing material, which has strong electrical conductivity and certain strength, and is not easy to deformation during processing. In addition, the anodized 1060, 1070 aluminum for bus duct provides excellent corrosion protection!

2. It is worth mentioning that, Mingtai Al. is equipped with a board shape controller to monitor the board shape of 1060 aluminum and 1070 aluminum sheet in real time. And in the subsequent pull rectification process, the secondary correction plate, so as to ensure the production of 1060, 1070 aluminum for bus duct plate type better, more flatness, more accurate!

3. Here, Henan Mingtai Aluminum Industry Co.,Ltd is a large aluminum sheet manufacturer for aluminum conductor busduct substrate, working with a number of internationally known Aluminum Bus manufacturers, one of which has purchased 100 tons of 1060 aluminum sheet for bus bar ! So far, Mingtai 1060, 1070 aluminum for bus duct has been successfully exported to more than 40 countries and regions, with guaranteed quality, and provided original warranty for global users!


Physical Properties of Aluminum for Bus Duct



Technical Parameters of Aluminum for Bus Duct


Typical Alloy

Temper

Thickness(mm)

Width(mm)

Length(mm)

1060 AluminumSheet

F,O,H111,H112

10-400

100--2650

500--16000

1070 Aluminum Sheet

F,O,H111,H112

10-400

100--2650

500--16000


Alloy Content of Aluminum for Bus Duct


Alloy

Si

Fe

Cu

Mn

Mg

Cr

Ni

Zn

Ti

Zr

V

Others

Al

1060

0.25

0.36

0.05

0.03

0.03

-

-

0.05

0.03

-

0.05

0.03/single

99.6

1070

0.2

0.25

0.04

0.03

0.03

-

-

0.04

0.03

-

0.05

0.03/single

99.7


Mechanical Properties of Aluminum for Bus Duct


Alloy Grade

Tensile strength

Density

Elongation

Electrical conductivity

1060

110MPa-136MPa

2.68 g/cm^3

3%-5%

62

1070

85MPa

2.70 g/cm^3

             62

Aluminum for Bus Duct Field
aluminum for bus duct 1.jpg
aluminum for bus duct 1.jpg
aluminum for bus duct 2.jpg
aluminum for bus duct 2.jpg
aluminum for bus duct 3.jpg
aluminum for bus duct 3.jpg
aluminum for bus duct 4.jpg
aluminum for bus duct 4.jpg
aluminum for bus duct 5.jpg
aluminum for bus duct 5.jpg
Which Type Of Aluminum Alloy Apply To This Industry?
1070 aluminum sheet
1070 aluminum sheet Thickness: 0.1-500
Model: 1070
1060 Aluminum Sheet
1060 Aluminum Sheet Thickness: 0.1-500
Model: 1060
1060 Aluminum Coil
1060 Aluminum Coil Thickness: 0.2-8
Model: 1060
Checking Order Quality Test Before Delivery Check Items When Packing Packaging And Transport
Get An Instant Quotation

For all inquiries, please fill in the form below (* are required) to send us a brief message, and we will get back to you as soon as possible.

Name:
* Email:
Tel: