The H14 in 3003-h14 aluminum sheet specifications means that it is tempered, which also means that it is partially annealed and strain hardened. This makes this metal easy to shape. A 3003 H14 aluminum sheet is a diamond aluminum sheet with the same characteristics. This 3003-h14 aluminum sheet with a diamond pattern is non-slip and aesthetic. It is very light, but very strong. There are many kinds of 3003-h14 aluminum sheet specifications, and most manufacturers customize 3003h14 aluminum sheet according to the needs of customers. The workability grade of 3003-h14 aluminum is 97%, and it can be easily welded using typical welding methods. Heat treatment cannot be used.
As an aluminum sheet manufacturer, we often receive customer inquiries for 3003 aluminum sheet, of course, 3003-H14 tempered. Different projects, 3003-h14 aluminum sheet specifications are also different. Customers put forward specifications and dimensions according to their own projects, and we arrange production. Here are some common applications of 3003-h14 aluminum sheet.
3003 can be used in various applications in different industries. Among them, 3003-H14 is also widely used. Including industry: stamping parts, spinning parts and products, cooking utensils, chemical equipment; construction: construction hardware, siding, kitchen equipment, decorative strips, construction purposes, sign applications; transportation: storage tanks, truck and trailer parts, fuel tanks; Furniture: cabinets, fan blades, awnings, etc.
6061 can be heat treated, provides very good corrosion resistance, and is almost as strong as mild steel. It has T6 tempering. This means that it has been solution heat treated and artificially aged to a stable state. 6061T6 temper has higher strength and hardness. It also has a high strength-to-weight ratio, making it an excellent alternative to steel or stainless steel. In addition, it has excellent workability.
3003 h14 aluminum sheet is not heat-treatable, but it has very good weldability and excellent workability. In addition, it can be deep-drawn, spin-pressed, and has good welding performance. Although 3003 is about 20% stronger than pure aluminum sheet, it is significantly weaker than 6061. In addition, 3003 is a bit soft, making it more difficult to process and easily scratched.
They are the two most widely used alloys in the aluminum industry. But the difference between them is obvious. 3003 is mainly alloyed with Mn, and the main alloy composition of 5052 is Mg. In short, the alloying elements of 3003 are silicon, iron, copper, magnesium and zinc, while 5052 are silicon, copper, manganese, magnesium, chromium and zinc.
Generally speaking, 3003 is relatively soft, has good corrosion resistance, good drawability, good workability, moderate strength, and can be welded; while 5052 has high strength, good corrosion resistance, good drawability, good formability, and high strength. Can be welded.
For all inquiries, please fill in the form below (* are required) to send us a brief message, and we will get back to you as soon as possible.