Aluminum checker plate with 1/8 inch thickness and 4x8 size is 4x8 1 8 aluminum diamond plate. This size specification is one of the commonly used specifications. In addition, the thickness is 0.8/1.0/1.2/1.5/2.0/2.5/3.0/4.0/5.0mm. The size is also 1250*2500. The maximum thickness can be up to 9 mm and can be customized.
1060 4x8 1 8 aluminum diamond plate applications: lighting, packaging, decoration, aluminum-plastic substrates, aluminum curtain wall substrates, aluminum partitions. The specific requirements of alloy, tempering or specifications can be discussed according to your requirements. 1050 aluminum plate is cheaper. This kind of aluminum checker plate is also called pure aluminum aluminum checker plate, which has the highest aluminum content among all the series produced by Mingtai. The aluminum content of the whole series is above 99.00%.
The reason for the low cost is the production process, the process is very simple, the price is cheap, and it is very commonly used in the conventional industry.
6061 4x8 1 8 aluminum diamond plate is a heat-treatable aluminum alloy product, which can provide aging treatment to T6 temper. The hardness is 2-3 times that of ordinary aluminum plate. Due to its good cutting performance, it is suitable for lathe and milling machine processing. The data shows that the maximum hardness of 6061 aluminum plate can reach above 95HB, and the maximum hardness of conventional aluminum plate is about 30HB. Therefore, high hardness is one of the main features of 6061 aluminum plate. Due to the high hardness of the aluminum plate after T6, 6061T6aluminum diamond plat is not suitable for bending processing.
At the same time, 6061 aluminum diamond plate also has good anodizing performance, which is suitable for machining anodizing. 6061 aluminum plate is a hot-rolled product with good anodizing performance. Machine manufacturers can improve the surface hardness and service life of aluminum plates through anodizing.
Many customers will ask: Why is the price of 4x8 1 8 aluminum diamond plate so different? Today, we will popularize the factors that affect the price of aluminum diamond plate.
Price is related to width
And the width affects the price of aluminum checker plate. The normal width is between 1000-1250mm. 4x8 is a regular size. If it exceeds this range, the price will rise. Our company can produce the maximum width of 2600mm, but the price is also higher than the average width. Therefore, the width affects the price of aluminum checker plate, and it is recommended to use regular width to reduce cost.
The price is related to the pattern
Different patterns have different prices. The most used and most cost-effective is the 5 bar aluminum tread plate, and the aluminum diamond plate has a higher price. The highest quality aluminum diamond plate, a single structure will not break, and the service life is extremely long. These diamond patterns are glued to the precision ground surface and become one with it.
For all inquiries, please fill in the form below (* are required) to send us a brief message, and we will get back to you as soon as possible.