Tanker is a tank-shaped transport vehicle, used to transport various liquids, liquefied gases and powdered goods, such as gasoline, crude oil, various viscous oils, vegetable oils, liquid ammonia, wine, water, various acids Alkali liquid, cement lead oxide powder, etc. In view of the superior performance of the aluminum alloy tank car in terms of economy, environmental protection and safety. Alloy aluminum plate has become the choice of tank car material. The commonly used materials are 5083 aluminum plate, 5754 aluminum plate, 5454 aluminum plate and 5182 aluminum plate.
Mingtai Aluminum supplies aluminum alloy tank car aluminum plate suppliers, can produce and supply aluminum plate for tank cars, 5083 aluminum plate, 5754 aluminum plate, 5454 aluminum plate, 5182 aluminum plate, undertake orders of 8-5000 tons of aluminum plate, and export globally.
The aluminum alloy tank truck is made of aluminum alloy, which makes its weight lighter. By reducing the weight, the payload of the whole vehicle can be increased. The weight of a single transported cargo is 18%-35% more than that of a carbon steel tank truck.
The chemical properties of aluminum alloy are stable, and the corrosion resistance of aluminum alloy is more than 70% higher than that of ordinary carbon steel. The enhanced corrosion resistance greatly reduces the related maintenance costs of the tank.
From the appearance point of view, the appearance of the aluminum alloy tank truck is more beautiful, and it does not need to be painted and is easy to clean.
The excellent characteristics of aluminum alloy make the service life of aluminum alloy oil tank trucks longer. The old aluminum alloy tank body with better maintenance can also be used on the new chassis. Even if the tank body is scrapped, there is a high recovery rate. value.
Aluminum alloy sheet 5083 has good plasticity, is easy to process, and has excellent formability.
Aluminum alloy plate 5083 has strong weldability, gas welding, arc welding, contact spot welding and wire welding are all available.
Aluminum alloy plate 5083 has anti-skid, anti-rust functions, and strong corrosion resistance.
In the production process of 5083 aluminum plate, Mingtai Aluminum added a small amount of Be to reduce the crack tendency of the ingot and improve the surface quality of the rolled plate.
5083 aluminum plate specification for tank car body
|
5083 aluminum chemical composition (mass fraction) /% |
|||||||||||
|
Alloy |
Si |
Cr |
Cu |
Mn |
Fe |
Zn |
Mg |
Ti |
Others |
Al |
|
|
|
|
|
|
|
|
|
|
|
Each |
Total |
|
|
5083 |
≤0.4 |
0.05~0.25 |
≤0.10 |
0.4~1.0 |
0.4 |
≤0.25 |
4.0~4.9 |
≤0.15 |
0.05 |
0.15 |
Remain |
