5083 belongs to the Al-Mg-Si alloy and has a wide range of applications. The application of 5083 aluminum sheets belongs to the high-end field of the aluminum processing industry. With the vigorous development of the rail transit market and the arrival of the global automobile era, it has a huge market prospect.
According to the market development of 5083 aluminum sheets and the demand for lightweight delivery, Mingtai Aluminum has increased the production of 5083 aluminum sheets and strictly controlled the product process of 5083 aluminum sheets. Through determination of alloy composition, optimization of melting and casting process, homogenization heat treatment and rolling process test.
The performance of Mingtai’s 5083 marine aluminum plate meets the requirements of users, especially to meet the increasing processing needs of complex parts such as marine aluminum plate, rail transit, and high-end cars, and has a very broad application prospect.
H temper is a common temper of finished aluminum plate, which means that the aluminum plate has been processed and hardened to improve its strength. H temper is a state with more subdivided tempers. Aluminum plates of the same specification and alloy have different subdivided tempers, and their performance will also vary greatly. H116 temper is suitable for products made of 5-series alloys with a magnesium content ≥ 4.0%, and these products have specified requirements for mechanical properties and exfoliation corrosion resistance.
5083H116 aluminum plate is a commonly used state of 5083 aluminum sheets, tensile strength σb (MPa) ≥ 305MPa, conditional yield strength σ0.2 (MPa) ≥ 215MPa, elongation δ10 (%) ≥ 20, elongation δ5 ( %)≥12
Recently, good news spread again in the ship board market of Mingtai Aluminum Industry. 20 tons of Mingtai 5083 aluminum sheets were shipped to Thailand and have been engaged in the shipbuilding of local shipbuilding enterprises.
Spec is A5083-H116,Maybe 200 tons per year. 3.17t, 900mm*2730mm
Since the 1+1 hot rolling production line of Mingtai Aluminum was put into operation, it has attracted many high-level shipyards to visit the factory. It is reported that many shipbuilding companies signed contracts directly after arriving at the factory, and some shipbuilding companies tried to order 5083 ultra-wide ship plates in batches, and then maintained long-term cooperation with Mingtai Aluminum.
Mingtai Aluminum can produce almost all 5083 aluminum sheets of common temper, with a thickness range of 0.15-500mm, a width range of 100-2650mm, and a length range of 500-16000mm, which can meet the diverse needs of different customers.
In order to build a first-class brand of marine aluminum sheets, Mingtai Aluminum has equipped a complete service system and checks every level in production and quality inspection to ensure high-quality products. At the same time, Mingtai is equipped with a powerful comprehensive logistics system, which provides a strong guarantee for the transportation of a large number of 5-series wide and thick plates, allowing customers to receive the goods without worry.